Use code iBC824 for FREE SHIPPING to the UK

Blogs

Ways on how to Avoid Power Surge Damage At Home

You want to protect your home from power surge damage as much as possible so that it doesn’t have any lasting effects on your family’s safety or comfort. Follow these simple steps for prevention and protection!

What is Power Surge?

A power surge is a sudden, intense burst of electricity that lasts for only seconds and can disrupt the workings of your electronics. A typical voltage coming from an outlet in North America may be 120 volts, but it’s not uncommon to fluctuate between 0-169 volts. When you get past 169 volts, this happens to create a power surge which could potentially damage any devices plugged into outlets near where there was excessive voltage flow.

When too much electricity flows through an appliance at once, the appliance could overheat, break down, or even catch fire. This uncontained arc generates heat, which could melt or erode appliance components. A severe enough surge could even start a fire!

Power Surge Causes, Tips and Prevention Guide

Causes Why Power Surge Happens

The electricity that courses through your home can reach a state of equilibrium with the flow from power sources. If this balance is disrupted by any number of factors, then you may experience an overload in voltage and amperage due to what are called “power surges.” These factors include:

  • The utility provider does a power grid switch.
  • A transmission line or transformer malfunctions.
  • Tripped circuit breakers and short circuits in your wiring
  • Storms and lightning strike.

Signs of Power Surge in Electricity

A power surge can happen so fast there is usually not much you can do to prevent it from happening, at least the first time. Some indications of a power surge include tripper circuit breaker or safety switch, sudden resetting or power loss of devices, and ‘bricked’ electrical device. If anyone these signs are noticed in your home then take action by shutting off all electronic equipment before inspecting for potential causes such as bad wiring, shorting out wires from water damage due to flooding etcetera.

How to Prevent Power Surge to Damage

There are several ways of ensuring one’s safety from these awful surges and it turns out they’re pretty simple too!

Check the Electrical Wiring of the House

A power surge can happen so fast there is usually not much you can do to prevent it from happening, at least the first time. Some indications of a power surge include tripper circuit breaker or safety switch, sudden resetting or power loss of devices, and ‘bricked’ electrical device. If anyone these signs are noticed in your home then take action by shutting off all electronic equipment before inspecting for potential causes such as bad wiring, shorting out wires from water damage due to flooding etcetera.

Install and Use Surge Protection Devices

Companies that offer electrical engineering design services can install the protector at your primary breaker. It will operate as a gateway for current coming into your home’s system, making sure it doesn’t get too high and shut off in case of dangerous spikes from electricity sources like lightning. Ideally, this would redirect excess power to an underground wire should something happen on its way through our home electrical wiring.

Unplugging of Electronic Device when there are Lightning Storms

A power surge can happen so fast there is usually not much you can do to prevent it from happening, at least the first time. Some indications of a power surge include tripper circuit breaker or safety switch, sudden resetting or power loss of devices, and ‘bricked’ electrical device.

If anyone these signs are noticed in your home then take action by shutting off all electronic equipment before inspecting for potential causes such as bad wiring, shorting out wires from water damage due to flooding etcetera.

Different Kinds of Surge Protection Devices

Difference of Surge Protectors and Surge Suppressor

Surge suppressors are often used to regulate voltage and provide protection against power surges. For instance, if your computer is not functioning properly because it was turned off by the protector when there was a surge or spike in voltage, then you would need an additional device called the “surge suppressor”.

A good example of what this might be can be seen with computers where constant turning on and off will eventually damage hardware due to excessive wear & tear from electrical spikes; however, surge protectors simply turn them off after detecting these changes in current/voltage without disrupting how they function while suppressing any further problems that may arise during their use.

Benefits of Surge Protection Devices in Electrical Appliances

If you’re looking for a way to protect your television, kitchen home appliances from surges without breaking the bank then surge protection is just what you need. With multiple electrical outlets on their power strip design, these can help house all of your cords while simultaneously protecting them with joules that measure 10-3120J (depending on if they are high or low voltage)- plus their low price is unbeatable! You’ll find an affordable option for under $20; if looking for something even safer (up to 1000 joules!), then check out options available starting at around twenty bucks.

Surge Suppressor Devices

Electrical devices to protect your home or business against electrical surges are small and may not look like much, but they’re worth the investment. For example, a transient voltage surge suppressor (TVSS) is an important device that protects power distribution panels by reducing lightning-caused voltages from nearby strikes before it reaches sensitive equipment in homes or businesses. This protection can be provided for homeowners at any time of day with no interruption to their daily activities thanks to the installation process which doesn’t require shutting down utilities first.

Whole-house surge suppressors

Once installed, whole-house surge suppressors or panel-mounted units can protect your home’s electrical systems from potentially disastrous power surges. The cost of these devices is based on how many joules they are able to absorb and ranges widely in price ($50-$200).

Power strips with surge protection

When looking at power strips with surge protectors, choosing a higher-end model will ensure that expensive electronics such as computers cannot get fried by unregulated voltage surges from nearby lightning strikes or passing storms. Despite how simple these devices might seem on first inspection, careful consideration about joules ratings before picking out an affordable unit ensures more peace of mind in knowing everything safeguarded has been taken care of properly

Surge Protector Devices

Surge Protective Devices are devices that protect the system from voltage spikes. They act as an umbrella term for any protective device used to limit transient overvoltage and divert current waves away from sensitive equipment, such as electrical installations or switchgears. A surge protection device (SPD) is a plug-in type of unit with two main features: it has metal oxide varistors – these serve to absorb sudden surges in electricity flow; they also have capacitors that help by removing static charges, so there’s less likelihood you’ll get hit when touching something metallic nearby like a door handle!

Power surges are a menace to the average homeowner, but if you know what causes them and how they affect your home’s electricity systems it is possible to avoid these power surge damages.

Power surges can be caused by a variety of things, such as electrical equipment malfunctions or lightning. When this happens it is important to avoid power surge damage at home and take precautions by installing power suppressor and protector devices and making your house power surge proof!

Leave a Reply

Your email address will not be published.

Main Menu x